RECESSED GRAPHICS	RAISED GRAPHICS (optional) When raised text or graphics is specified, the background will be painted, leaving the text or graphics in the alloy color.
RAISED GRAPHICS	RECESSED GRAPHICS (standard) The standard on all Etched Plaques is recessed text and graphics that are paint filled.

(more…)

MATERIALS

STAINLESS STEEL Alloy 304; Optional Alloy 319. Thicknesses include 1/16", 1/8", 3/16" & 1/4".

STAINLESS STEEL

 

COMMERCIAL BRONZE (90/10) Alloy C22000; 90% Copper, 10% Zinc. Thicknesses include 1/16", 1/8", 3/16" & 1/4".

COMMERCIAL BRONZE

 

NAVAL BRASS (60/39/1) Alloy C46500; 60% Copper, 39.25% Zinc, .75% Tin. Thicknesses include 1/16", 1/8", 3/16" & 1/4".

NAVAL BRASS

 

COPPER Alloy C11000; Thicknesses include 1/16", 1/8", 3/16" & 1/4".

COPPER

 

(more…)

SIGN 2000 has many options to honor or memorialize that special person. Send us the photo and choose from one of the three options shown below. PHOTO ETCH  

The etching process allows you to forever replicate your photograph, line drawing or complex artwork. This method utilizes a halftone dot pattern made from a 50-line screen. Halftone portraits resemble newspaper photographs, and have visible dot patterns. The etched, recessed dots are black infilled to contrast with the satin finished metal background. The best photographs for halftone etched protraits have high contrast tones with bright white areas, dense black areas and minimal grey tones. Photos that are monotone or have muted colors will produce poor halftone etchings. Halftone etchings are not available in aluminum. Single Line Border - Brown Pebble Background - With Bas Relief Single Line Border - Black Stipple Background - Two Etched Photo Inserts We start with a photograph. Although we can use almost any quality photograph, the better the image the better the modeling effort. Remember, the finished image will be an artists interpretation of this photograph. An image of this clay model is sent to you via email for your comments or approval. When approved, the clay model is used for the bronze casting process. While the clay model is a monotone, the finished bronze casting contains highlights. The bas relief is mechanically attached to the plaque background. Overall height of around 6" to 9" with a finished depth of 3/4" to 1".   Sculpturing Guidelines Provide more than one picture of the person so the sculptor can discern straight hair, wavy hair, etc. But select which picture the bas is to bebased upon. If the picture to be sculpted has a pin, brooch, or patch on the apparel, keep in mind that on a 6? high sculpture, that image is only about 1/4? to3/4? high, and detail cannot be achieved in the sculpting process. Moreoften than not, it is better to leave these adornments off instead of thefinished product looking like there is a ?blob? on the shirt. The sculpture is done right off the picture provided, with the same width of head, neck and shoulders. We cannot make a person look ?10 yearsyounger? nor can features such as mustache, eyebrows or hair behighlighted. Highlighting is done in the casting and finishing process ofmanufacturing, not sculpting. If a picture provided is poor or has bad lighting, tell us if the person has wavy, straight or curly hair. Often by the picture we cannot tell what thehair texture is and must go by what it appears to be. Changes made to sculptures that were not on the picture provided could result in scrapping out the entire first sculpture and would result in a newsculpture charge. Be realistic with changes The smaller the bas relief, the harder it is to capture the essence of the person. Details of the face, such as cheekbones, wrinkles, etc., cannot beindicated on these as well as larger sculptures. The bigger and higher resolution pictures produce the best sculpturing results. Dark clothing does not show where the collar or shirt stops and starts. Please lighten pictures with light clothing. Many times rank emblems are so small we cannot tell what the actual shape is. Please type up a description or draw a sketch.

 

 

Threaded rods screwed into back of plaque and placed into cement filled holes.

TYPE A-BLIND MOUNT

Machine screws going through optional rosettes into cement filled holes.

TYPE B-SOLID WALL MOUNT

Installation using toggle bolts with optional rosettes for hollow or drywall mount.

TYPE C-HOLLOW WALL MOUNT

Installation into wood surfaces using wood screws and optional rosettes.

TYPE D-WOOD WALL MOUNT

Machine screws going through 3/8" thick black anodized stakes into back of plaque. Maximum plaque size is 12" x 8" for 1 stake or 20" x 8" for 2 stakes.

TYPE E-GARDEN STAKE MOUNT

Black enamel-coated steel square posts attach to the back of the plaque with machine screws. Post can be welded with an angle you specify.

TYPE F-SQUARE POST MOUNT

ROSETTES

1/2", 3/4", 1" & 1-1/2"

R-1

1/2", 3/4", 1" & 1-1/2"

R-2

1" & 1-1/2"

R-3

1" & 1-1/2"

R-4

1/2", 3/4" & 1"

R-5

1" & 1-1/2"

R-6

1" & 1-1/2"

R-7

(more…)

BLACK
BROWN
DARK OXIDE

(more…)