EDGES
MATERIALS
GRAPHICS
MOUNTING

EDGES

STRAIGHT EDGE	BEVEL EDGE

half the material thickness. Bevel edges are not available on 1/16″ thick material or any Stainless Steel.

MATERIALS

STAINLESS STEEL	COMMERCIAL BRONZE

STAINLESS STEEL Alloy 304; Optional Alloy 319. Thicknesses include 1/16″, 1/8″, 3/16″ & 1/4″.	COMMERCIAL BRONZE (90/10) Alloy C22000; 90% Copper, 10% Zinc. Thicknesses include 1/16″, 1/8″, 3/16″ & 1/4″.
NAVAL BRASS	COPPER

NAVAL BRASS (60/39/1) Alloy C46500; 60% Copper, 39.25% Zinc, .75% Tin. Thicknesses include 1/16″, 1/8″, 3/16″ & 1/4″.	COPPER Alloy C11000; Thicknesses include 1/16″, 1/8″, 3/16″ & 1/4″.

GRAPHICS

RECESSED GRAPHICS	RAISED GRAPHICS

RAISED GRAPHICS (optional) When raised text or graphics is specified, the background will be painted, leaving the text or graphics in the alloy color.	RECESSED GRAPHICS (standard) The standard on all Etched Plaques is recessed text and graphics that are paint filled.

MOUNTING METHODS

STUD MOUNT	STUD BOSS MOUNT	SCREW MOUNT

STUD MOUNT (blind mount) All plaques 1/4″ thick and thicker are drilled and tapped. 1/16″ & 1/8″ thick plaques have double face tape applied to the back. Tape is 3M #4930 – 25 mil. Tape for use in most applications. You will need to verify if this works for your applicatio	STUD BOSS MOUNT Stud bosses can be welded to the backs of 1/8″ & 3/16″ thick plaques.	SCREW MOUNT (flush mount) Holes are drilled through the surface of the plaque. Specify screw size and if you need the holes to be countersunk. 1/16″ thick plaques cannot be countersunk and will include round head screws.